Pella Window 802Q0102 User Manual

© 2012 Pella Corporation  
Part Number: 802Q0102  
INSTALLATION INSTRUCTIONS  
SLIDING, SINGLE-HUNG and FIXED WINDOW  
WITH FINS  
Installation Instructions for Typical Wood Frame Construction.  
These instructions were developed and tested for use with typical wood frame wall  
construction in a wall system designed to manage water. These instructions are not to  
be used with any other construction method. Installation instructions for use with other  
construction methods or multiple units may be obtained from Pella Corporation or a local  
Pella retailer. Building designs, construction methods, building materials, and site conditions  
unique to your project may require an installation method different from these instructions and  
additional care. Determining the appropriate installation method is the responsibility of you,  
your architect, or construction professional.  
YOU WILL NEED TO SUPPLY:  
TOOLS REQUIRED:  
Ř&HGDUꢀRUꢀ,PSHUYLRXVꢀVKLPVꢁVSDFHUVꢀꢂꢃꢄꢀWRꢀꢄꢅꢆ  
ŘꢇꢀJDOYDQL]HGꢀURRŵQJꢀQDLOVꢀꢂꢃꢁꢈꢀOEꢉꢆ  
Ř&ORVHGꢀFHOOꢀIRDPꢀEDFNHUꢀURGꢁVHDODQWꢀEDFNHUꢀ  
ꢂꢃꢄꢀWRꢀꢊꢅꢀIWꢉꢆ  
Ř7DSHꢀPHDVXUH  
Ř/HYHO  
Ř6TXDUH  
Ř3HOODpꢀ6PDUW)ODVKŠꢀIRLOꢀEDFNHGꢀEXW\OꢀZLQGRZꢀ  
and door flashing tape or equivalent  
Ř3HOODꢀ:LQGRZꢀDQGꢀ'RRUꢀ,QVWDOODWLRQꢀ6HDODQWꢀRUꢀ  
equivalent high quality, multi-purpose sealant  
Ř+DPPHU  
Ř6WDSOHU  
Ř6HDODQWꢀJXQ  
Ř6FLVVRUVꢀRUꢀXWLOLW\ꢀNQLIH  
Ř6PDOOꢀŶDWꢀEODGHꢀVFUHZGULYHU  
Ř5XEEHUꢀPDOOHW  
ꢂꢃꢀWXEHꢀSHUꢀZLQGRZꢆ  
4&"-"/5  
Ř/RZꢀH[SDQVLRQꢋꢀORZꢀSUHVVXUHꢀSRO\XUHWKDQHꢀLQVXODWLQJꢀ  
window and door foam sealant - DO NOT use high  
SUHVVXUHꢀRUꢀODWH[ꢀIRDPV  
Installation will require two or more persons for safety reasons.  
REMEMBER TO USE APPROPRIATE  
PERSONAL PROTECTIVE EQUIPMENT  
Nailing Fin  
Top  
Flashing  
Tape  
Corner  
Flashing  
Tape  
Side  
Flashing  
Tape  
Corner  
Flashing  
Tape  
Weep  
Valves  
Sill Flashing Tape #1  
Sill Flashing Tape #2  
Weather Resistive Barrier  
Side  
Flashing  
Tape  
Sheathing  
Framing  
Always read the Pella Impervia Limited Warranty before purchasing or installing  
Pella Impervia products. By installing this product, you are acknowledging that this Limited  
Warranty is part of the terms of the sale. Failure to comply with all Pella Impervia installation and  
maintenance instructions may void your Pella Impervia product warranty. See Limited Warranty  
 
2
SETTING AND FASTENING THE WINDOW  
A. Install and level shims.ꢀ3ODFHꢀꢃꢇꢀZLGHꢀE\ꢀꢃꢁꢈꢇꢀWKLFNꢀVKLPVꢀ  
RQꢀWKHꢀERWWRPꢀRIꢀWKHꢀRSHQLQJꢋꢀꢃꢁꢈꢇꢀIURPꢀHDFKꢀVLGHꢋꢀEHQHDWKꢀ  
WUDQVLWLRQꢀEDUVꢀDQGꢀPXOOLRQꢀMRLQWVꢉꢀꢀ.HHSꢀVKLPVꢀEDFNꢀꢃꢁꢄꢇꢀIURPꢀ  
interior face of window. Adjust shims as necessary to ensure the  
sill is level. Once level, attach shims to prevent movement.  
$  
Note: Improper placement of shims may result in bowing  
the bottom of the window.  
B. Remove plastic wrap and cardboard packaging from  
window. DO NOT open the window until it is fully fastened.  
Note: For best results, install the window with the sash  
closed and locked with the shipping spacers in place.  
TWO OR MORE PEOPLE WILL BE REQUIRED  
FOR THE FOLLOWING STEPS.  
ꢄ&  
Note: If fins are to be installed to no fin  
units, go to the Applying Installation Fin  
instructions on the back before proceeding  
to step C.  
C. Insert the windowꢀIURPꢀWKHꢀH[WHULRUꢀRIꢀWKHꢀEXLOGLQJꢉꢀ  
Place the bottom of the window on the spacers at the  
bottom of the opening, then tilt the top into position.  
Center the window between the sides of the opening to  
DOORZꢀFOHDUDQFHꢀIRUꢀVKLPPLQJꢀDQGꢀLQVHUWꢀRQHꢀURRŵQJꢀQDLOꢀ  
LQꢀWKHꢀŵUVWꢀKROHꢀIURPꢀWKHꢀFRUQHUꢀRQꢀHDFKꢀHQGꢀRIꢀWKHꢀWRSꢀ  
QDLOLQJꢀŵQꢉꢀ7KHVHꢀDUHꢀXVHGꢀWRꢀKROGꢀWKHꢀZLQGRZꢀLQꢀSODFHꢀ  
while shimming it plumb and square.  
Interior View  
'
D. Plumb and square window.ꢀ3ODFHꢀVKLPVꢀꢃꢇꢀIURPꢀWKHꢀ  
bottom and top of the window between the window and  
WKHꢀVLGHVꢀRIꢀWKHꢀRSHQLQJꢉꢀ.HHSꢀVKLPVꢀEDFNꢀꢃꢁꢄꢇꢀIURPꢀ  
interior face of window. Adjust the shims as required to  
plumb and square the window in the opening. If the frame  
KHLJKWꢀH[FHHGVꢀꢍꢊꢇꢋꢀSODFHꢀVKLPVꢀDWꢀWKHꢀTXDUWHUꢀSRLQWVꢀRIꢀ  
the window sides.  
ꢄ'  
Note: DO NOT shim above the window or in the space  
between the spacers at the bottom of the window. DO  
NOT over shim.  
ꢄ(  
1
E. Check the interior reveal. Make sure the measurement from  
the interior face of the window to the interior face of the wall is  
equal at several points around the window.  
INCHES  
mm 2  
0
2
5
3
3
0
4
0
0
6
0
7
0
F. Fasten the window to openingꢀE\ꢀGULYLQJꢀꢄꢇꢀJDOYDQL]HGꢀ  
URRŵQJꢀQDLOVꢀLQWRꢀHDFKꢀSUHSXQFKHGꢀKROHꢀLQꢀWKHꢀQDLOLQJꢀŵQꢉꢀ  
G. Check the window operation.ꢀ5HPRYHꢀWKHꢀSODVWLFꢀ  
spacers located between the bottom of the vent panel and  
the frame sill. Open and close the window a few times to  
check for proper operation. Close and lock the window.  
ꢄ(  
Note: If there are any problems with the operations  
of the window, recheck shim locations and adjust for  
plumb and square.  
 
INTEGRATING THE WINDOW TO THE WATER  
RESISTIVE BARRIER  
3
A. Apply side flashing tape. Cut two pieces of flashing  
WDSHꢀꢈꢇꢀORQJHUꢀWKDQꢀWKHꢀIUDPHꢀKHLJKWꢀRIꢀWKHꢀZLQGRZꢉꢀ  
$SSO\ꢀRQHꢀSLHFHꢀWRꢀHDFKꢀVLGHꢀꢃꢁꢄꢇꢀRQWRꢀWKHꢀIUDPHꢋꢀ  
RYHUꢀWKHꢀQDLOLQJꢀŵQꢀDQGꢀRQWRꢀWKHꢀZDWHUꢀUHVLVWLYHꢀ  
EDUULHUꢉꢀ7KHꢀWDSHꢀVKRXOGꢀH[WHQGꢀꢄꢇꢀDERYHꢀWKHꢀWRSꢀRIꢀ  
WKHꢀZLQGRZꢀDQGꢀꢄꢇꢀEHORZꢀWKHꢀERWWRPꢀRIꢀWKHꢀZLQGRZꢉꢀ  
3UHVVꢀWKHꢀWDSHꢀGRZQꢀŵUPO\ꢀZKLOHꢀIROGLQJꢀGRZQꢀWKHꢀ  
H[FHVVꢀWDSHꢀDWꢀWKHꢀWRSꢀDQGꢀERWWRPꢀRIꢀWKHꢀZLQGRZꢉ  
ꢊ$  
B. Apply top flashing tape. Cut a piece of flashing tape  
long enough to go across the top of the window and  
H[WHQGꢀDWꢀOHDVWꢀꢃꢇꢀSDVWꢀWKHꢀVLGHꢀIODVKLQJꢀWDSHꢀRQꢀERWKꢀ  
VLGHVꢉꢀ$SSO\ꢀWKHꢀWDSHꢀꢃꢁꢄꢇꢀRQWRꢀWKHꢀIUDPHꢋꢀRYHUꢀWKHꢀ  
top nailing fin as shown. Fold the overlapping tape  
down, and press all tape down firmly.  
ꢊ%  
Note: DO NOT tape or seal the bottom nailing fin.  
%  
C. Fold down top flap of the water resistive barrier.  
ꢀꢇ  
D. Apply flashing tape to diagonal cuts. Cut pieces of  
IODVKLQJꢀWDSHꢀDWꢀOHDVWꢀꢃꢇꢀORQJHUꢀWKDQꢀWKHꢀGLDJRQDOꢀFXWVꢀ  
in the water resistive barrier. Apply the tape covering  
the entire diagonal cut in the water resistive barrier at  
both upper corners of the window.  
ꢊ&  
ꢊ'  
Note: Be sure to overlap the top corners.  
ꢊ'  
4
INTERIOR SEAL  
Caution: Ensure use of low pressure polyurethane window and door insulating foams  
and strictly follow the foam manufacturer’s recommendations for application. Use  
of high pressure foams or improper application of the foam may cause the window  
frame to bow and hinder operation.  
Interior View  
A. Apply insulating foam sealant. From the interior, insert  
WKHꢀQR]]OHꢀRIꢀWKHꢀDSSOLFDWRUꢀDSSUR[LPDWHO\ꢀꢃꢇꢀGHHSꢀLQWRꢀ  
the space between the window and the rough opening  
DQGꢀDSSO\ꢀDꢀꢃꢇꢀGHHSꢀEHDGꢀRIꢀIRDPꢉꢀ7KLVꢀZLOOꢀDOORZꢀURRPꢀ  
IRUꢀH[SDQVLRQꢀRIꢀWKHꢀIRDPꢀDQGꢀZLOOꢀPLQLPL]HꢀVTXHH]Hꢀ  
out. Apply sealant across interior surface of shims  
to create a continuous seal. For windows with jamb  
H[WHQVLRQVꢀLQVWDOOHGꢋꢀHQVXUHꢀWKHꢀIRDPꢀLVꢀSODFHGꢀEHWZHHQꢀ  
the window frame and the rough opening, not between  
WKHꢀMDPEꢀH[WHQVLRQꢀDQGꢀWKHꢀURXJKꢀRSHQLQJꢉꢀ)ROORZꢀIRDPꢀ  
manufacturer's instructions.  
ꢈ$  
Note: It may be necessary to squeeze the end of the tube with pliers to be able to  
insert into the space between the window frame and the rough opening. DO NOT  
completely fill the space from the back of the fin to the interior face of the opening.  
B. Check window operationꢀꢂYHQWꢀXQLWVꢀRQO\ꢆꢀE\ꢀRSHQLQJꢀDQGꢀFORVLQJꢀWKHꢀZLQGRZꢉ  
Note: If the window does not operate correctly, check to make sure it is still plumb,  
level, square and that the sides are not bowed. If adjustments are required, remove the  
foam with a serrated knife. Adjust the shims, and reapply the insulating foam sealant.  
 
SEALING THE WINDOW TO THE  
EXTERIOR WALL CLADDING  
When applying siding, brick veneer or other exterior finish material, leave adequate  
space between the window frame and the material for sealant. Refer to the illustration  
corresponding to your finish material.  
5
Note: The sealant details shown are standard recommendations from the sealant industry.  
Contact your sealant supplier for recommendations and instructions for these and any  
other applications.  
VINYL/STEEL  
SIDING  
WOOD  
SIDING  
BRICK VENEER  
Backer rod  
and  
sealant  
typical  
Backer rod  
and  
sealant  
typical  
Sealant  
typical  
Insulate  
and seal  
Insulate  
and seal  
Insulate  
and seal  
1/8"  
1/4"  
1/4"  
1/4"  
min.  
1/4"  
min.  
SOUTHWESTERN WALL  
WITH STUCCO  
STUCCO WITH  
INSULATION BOARD  
1/4"  
1/4"  
1/4"  
min.  
1/4"  
min.  
A. Insert closed cell foam backer rod into the space  
around the window as deep as it will go. This should  
SURYLGHꢀDWꢀOHDVWꢀDꢀꢃꢁꢈŔꢀFOHDUDQFHꢀEHWZHHQꢀWKHꢀEDFNHUꢀ  
URGꢀDQGꢀWKHꢀH[WHULRUꢀIDFHꢀRIꢀWKHꢀZLQGRZꢉ  
ꢍ%  
Note: Backer rod adds shape and depth for the  
sealant line.  
ꢍ$  
B. Apply a bead of high quality exterior grade  
sealant to the entire perimeter of the window.  
C. Shape, tool and clean excess sealant. When  
ŵQLVKHGꢋꢀWKHꢀVHDODQWꢀVKRXOGꢀEHꢀWKHꢀVKDSHꢀRIꢀDQꢀKRXUJODVVꢉ  
Note: This method creates a more flexible sealant line capable  
of expanding and contracting.  
 
APPLYING INSTALLATION FINS  
Frame head groove  
$ꢉꢀ 6OLGHꢀWKHꢀSUHFXWꢀERWWRPꢀŵQꢀLQWRꢀWKHꢀ  
frame sill groove located on the  
bottom window frame member.  
B
%ꢉꢀ ,QVWDOOꢀWKHꢀꢄꢀSUHFXWꢀVLGHꢀŵQVꢀ  
into the top of the frame jamb  
grooves located on the side frame  
members of the window. Slide the  
ŵQVꢀLQWRꢀSODFHꢉ  
C
Note: The side fins must overlap  
the exterior of the bottom fin.  
B
Frame  
sill groove  
C. Install and slide the precut top  
ŵQꢀLQWRꢀWKHꢀIUDPHꢀKHDGꢀJURRYHꢀ  
located in the top frame member.  
Note: The top fin must overlap  
the exterior of the side fins.  
A
Frame jamb groove  
'ꢉꢀ 6HDOꢀWKHꢀRYHUꢎODSSLQJꢀŵQꢀMRLQWVꢀZLWKꢀVHDODQWꢉ  
TO INSTALL THE WINDOW(S) PROCEED TO STEP 2C.  
 
FINISH  
7KHꢀLQWHULRUꢀDQGꢀH[WHULRUꢀIUDPHꢀDQGꢀVDVKꢀDUHꢀSURWHFWHGꢀE\ꢀDꢀSRZGHUꢀFRDWꢀEDNHGꢎRQꢀIDFWRU\ꢀŵQLVKꢀ  
that requires no painting. Clean this surface with mild soap and water. Stubborn stains and  
deposits may be removed with mineral spirts. DO NOT use abrasives. DO NOT scrape or use tools  
that might damage the surface.  
Use of inappropriate solvents, brickwash or cleaning chemicals will cause adverse reactions with  
window and door materials and voids the Limited Warranty.  
CARE AND MAINTENANCE  
Care and maintenance information is available by contacting your local Pella retailer. This  
information is also available at www.pellaimpervia.com.  
IMPORTANT NOTICE  
%HFDXVHꢀDOOꢀFRQVWUXFWLRQꢀPXVWꢀDQWLFLSDWHꢀVRPHꢀZDWHUꢀLQŵOWUDWLRQꢋꢀLWꢀLVꢀLPSRUWDQWꢀWKDWꢀWKHꢀZDOOꢀV\VWHPꢀ  
be designed and constructed to properly manage moisture. Pella Corporation is not responsible  
IRUꢀFODLPVꢀRUꢀGDPDJHVꢀFDXVHGꢀE\ꢀDQWLFLSDWHGꢀDQGꢀXQDQWLFLSDWHGꢀZDWHUꢀLQŵOWUDWLRQꢏꢀGHŵFLHQFLHVꢀLQꢀ  
EXLOGLQJꢀGHVLJQꢋꢀFRQVWUXFWLRQꢀDQGꢀPDLQWHQDQFHꢏꢀIDLOXUHꢀWRꢀLQVWDOOꢀ3HOODp products in accordance  
ZLWKꢀ3HOODꢀLQVWDOODWLRQꢀLQVWUXFWLRQVꢏꢀRUꢀWKHꢀXVHꢀRIꢀ3HOODꢀSURGXFWVꢀLQꢀZDOOꢀV\VWHPVꢀZKLFKꢀGRꢀQRWꢀDOORZꢀ  
for proper management of moisture within the wall systems. The determination of the suitability of  
all building components, including the use of Pella products, as well as the design and installation  
of flashing and sealing systems are the responsibility of the Buyer or User, the architect, contractor,  
installer, or other construction professional and are not the responsibility of Pella.  
Pella products should not be used in barrier wall systems which do not allow for proper  
PDQDJHPHQWꢀRIꢀPRLVWXUHꢀZLWKLQꢀWKHꢀZDOOꢀV\VWHPVꢋꢀVXFKꢀDVꢀEDUULHUꢀ([WHULRUꢀ,QVXODWLRQꢀDQGꢀ)LQLVKꢀ  
6\VWHPVꢋꢀꢂ(,)6ꢆꢀꢂDOVRꢀNQRZQꢀDVꢀV\QWKHWLFꢀVWXFFRꢆꢀRUꢀRWKHUꢀQRQꢎZDWHUꢀPDQDJHGꢀV\VWHPVꢉꢀ([FHSWꢀ  
LQꢀWKHꢀVWDWHVꢀRIꢀ&DOLIRUQLDꢋꢀ1HZꢀ0H[LFRꢋꢀ$UL]RQDꢋꢀ1HYDGDꢋꢀ8WDKꢋꢀDQGꢀ&RORUDGRꢋꢀPella makes no  
warranty of any kind and assumes no responsibility for Pella windows and doors installed  
in barrier wall systems. In the states listed above, the installation of Pella products in barrier  
wall or similar systems must be in accordance with Pella installation instructions.  
3URGXFWꢀPRGLŵFDWLRQVꢀWKDWꢀDUHꢀQRWꢀDSSURYHGꢀE\ꢀ3HOODꢀ&RUSRUDWLRQꢀZLOOꢀYRLGꢀWKHꢀ/LPLWHGꢀ:DUUDQW\ꢉ  
 

Pelco Security Camera C2444M C User Manual
Philips Battery Charger 357 User Manual
Philips Cordless Telephone CD4453Q User Manual
Philips DVR DVDR3440H User Manual
Philips Light Therapy Device HF 3300 User Manual
Philips Stereo Receiver US2 PH61150 User Manual
Pioneer Marine Radio MVH P8200 User Manual
Poulan Snow Blower PP521ES User Manual
Powermate Portable Generator PMC545006 User Manual
ProForm Hot Tub PFHS70071 User Manual