Pioneer Kitchen Entertainment Center MEP 4000 User Manual

      
         
           
             
               
                
                  
                    
                      
                        
                          
                            
                              
                               
                                 
                                   
                                     
                                       
                                          
                                            
                                              
                                                
                                                  
                                                    
  
    
      
        
          
           
             
               
MULTI ENTERTAINMENT PLAYER  
MEP-4000  
Firmware Update Manual  
 
Check the Version  
STEP 2.  
The UTILITY screen appears.  
Press the [DISPLAY(UTILITY)] button for  
at least 3 seconds. Then the [UTILITY]  
screen appears.  
STEP 4.  
Exit the version display mode.  
Press the [DISPLAY(UTILITY)] button to  
close the UTILITY screen.  
STEP 3.  
STEP 1.  
Check the version.  
Turn on the power.  
Turn the rotary selector to display the  
VERSION. When the version is displayed,  
press the rotary selector and turn it to  
check CON, DSPand SERversions.  
Press the [POWER] button.  
 
Updating  
STEP 1.  
Unzip the zip file on the computer.  
With the mouse, right-click on the MEP-4000vxxxx.zipzip file you have downloaded from the  
Pioneer website and select Propertiesand ensure that the number of bytes exactly matches.  
MEP-4000vxxx.zip (x,xxx,xxx bytes)  
With the mouse, right-click on the MEP-4000vxxx.zipand select Extract All.  
When you specify where to extract the file, the update files below are extracted in a folder named  
MEP-4000vxxx.  
MEP4KCxx-xx.bin  
MEP4KSxx-xx.hex  
MEP4K_xxxx.bin  
Pxi
MEP4KCxx-xx.bin  
MEP4K_xxxx.bin  
MEP4KSxx-xx.hex  
Update files  
STEP 2.  
Copy the unzipped update file to the root directory of the USB memory device.  
Use a USB memory device (USB mass storage class device) formatted in FAT16 or FAT32 and  
with at least 1Mbyte of free space.  
[NOTE]  
- Do not change the file name.  
- HFS and HFS+ formats are not supported.  
 
STEP 8.  
STEP 5.  
Check that the firmware has been  
Select USB1 source.  
updated to the latest version.  
Refer to Checking the Versionto check  
that the firmware is the latest version.  
Press to toggle the [SOURCE SELECT]  
button until the USB1 indicator on the left  
side is lit.  
STEP 6.  
Updating starts automatically.  
The message UPDATE DSPand  
UPDATE SERflashes on the Control unit  
display in series. Then UI xxxxis  
displayed.  
Do not disconnect the USB memory device  
or turn off the power during updating.  
STEP 3.  
Turn on the power.  
Disconnect the USB memory device and  
turn the power off. Then, turn on the  
power again.  
STEP 4.  
Insert the USB memory device into  
“Please Power OFF” message appears  
after completing the update.  
STEP 7.  
the USB1 port.  
Turn the power off and disconnect  
the USB memory device.  
Use the USB memory device where the  
update file was copied in advance.  
* If updating does not start  
The file you have downloaded may be corrupt.  
Start over from downloading the firmware update file. If updating is still not possible, the problem may be  
with the USB memory device. Try using a different USB memory device.  
* If the Please Power OFFmessage does not appear within 5 minutes:  
Contact a Customer Support Center.  
 

Peavey Microphone PVM 535i User Manual
Philips CD Player AZ 2020 User Manual
Philips Clock AJ290 User Manual
Philips Computer Monitor 105S26 User Manual
Philips CRT Television TP2781C User Manual
Philips MP3 Player SA6125 93 User Manual
Philips Stereo System MCM704D User Manual
Pioneer Bluetooth Headset BDP 52FD User Manual
Polaroid Film Camera Spectra 2 User Manual
Poulan Trimmer 177817 User Manual